正在显示: 1 - 10 的13 搜索结果
IOS – Xcode error xxx has conflicting provisioning settings.

IOS – Xcode error xxx has conflicting provisioning settings.

IOS – Xcode error xxx has conflicting provisioning settings.
xxx has conflicting provisioning settings.
xxx is automatically signed for development, but a conflicting code signing identity iPhone Distribution has been manually specified. Set the code signing identity value to “Apple Development” in the build settings editor, or switch to manual signing in the Signing & Capabilities editor.
Build Settings -> Signing -> Code Signing Identity 设置为 Apple Development 即可!

Xcode - Xcode如何解决Memory不显示内存使用的问题

Xcode – Xcode 提示 there is no memory profiling because NSZombieEnabled is enabled

Xcode – Xcode如何解决Memory不显示内存使用的问题 – Xcode 显示 there is no memory profiling because NSZombieEnabled is enabled,打开 Diagnostics 之后找到 Memory Management,可以查看到 Zombie Objects 前面的勾选框被勾选,所以导致项目运行时Memory没有显示,将 Zombie Objects 勾选框取消然后关闭 Scheme 编辑界面,再次运行工程,再查看 Debug 界面下的 Memory 此时已经能够正常显示内存值

Xcode - Your maximum App ID limit has been reached. You may create up to 10 App IDs every 7 days

Xcode – Your maximum App ID limit has been reached. You may create up to 10 App IDs every 7 days

Xcode – Your maximum App ID limit has been reached. You may create up to 10 App IDs every 7 days – 1.出现这种情况,直接用上一次的 Bundle ID 就行了,因为免费 App ID 账号苹果官方有所限制,直接更换以前在真机上运行的 App ID

2.这个时候你不管怎么改变 Bundle ID 都没有用,直接更换以前调试过的 Bundle ID ,就可以搞定了,建议每创建 Bundle ID 就记录一下,当出现这种问题的时候直接更换就可以了

Xcode - Embedded binary's bundle identifier is not prefixed with the parent app's bundle identifier

Xcode – Embedded binary’s bundle identifier is not prefixed with the parent app’s bundle identifier

Xcode – Embedded binary’s bundle identifier is not prefixed with the parent app’s bundle identifier – 如果是直接从网上下载的工程,首先检查工程 TARGETS 下的 Bundle Identifier 是否已设置。如果是 sdk 的 demo 工程,Bundle Identifier 通常是空白,需要手动填写。然后在下面 Signing 的 team 中选择开发者账号。同时,在 TARGETS 下相应地 Test 工程中也要做相同的设置。